# Enable Ignore Validation Rule

Learn how to enable the Ignore Validation Rule in your Vault.

## About the Feature

With the 22R1 release, Safety supports the Ignore Validation Rule feature which allows you to ignore a validation result evaluated as a fail or warning for a _Case_ or _Transmission_.

After you have configured this feature, see <a href="/en/lr/01226/#ignore-validation-results">Ignore Validation Results</a> for more information.

## Create the Ignore Validation Result Workflow

To create the **Ignore Validation Result** object workflow:

1. Navigate to **Admin > Configuration > Workflows** and create an <a href="/en/lr/33550/">object workflow</a> with the following settings:
  * **Label**: Ignore Validation Result
  * **Name**: `ignore_validation_result__c`
  * **Lifecycle**: Validation Result Lifecycle
2. Select **Save**.
3. Create a step between the **Start** and **End** with the following settings:
   * **Label**: Enter `Change State: Ignored`
   * **Type**: Select **Action**
   * **Next Steps**: Select **End**
   * In the **Rules** section, add **Rule 1** with the following settings:
     * Select **Perform with conditions**
     * **If**: Select **Field > Validation Status > is not equal to > Hard Fail**
     * **perform actions**: Select **Change State**
       * **Lifecycle State**: Select **Ignored**
4. Select **Save**.
5. Select **Make configuration active**.

## Update the Validation Result Lifecycle

Navigate to **Admin > Configuration > Object Lifecycles > Validation Result Lifecycle** and complete the steps in the following sections to update user actions and grant role permissions.

### Update User Actions for the Active State

1. In the **Validation Result Lifecycle**, select the **Active** state.
2. Configure the _User Actions_ as follows:
   * Select **Perform with conditions**
   * **If**: Select **Validation Status > is not equal to > Hard Fail**
   * **Allow the following actions**:
     * Select **Workflow > Ignore Validation Result**
     * Select **Display action in All Actions menu**
     * **Icon**: Select **Remove**
     * **Action Label**: Enter `Ignore Validation Result`
3. Select **Save**.

### Grant Permissions

1. In the **Validation Result Lifecycle**, edit the **Roles** section.
2. Grant **Read** permissions for the **Ignored** state to all roles.
3. Select **Save**.